Ordering Alis exterior line samples will allow you to test the colours you are interested in for your project. Not only you will be able to compare your preferred colours but you will experience how natural wood oil can enhance your wood looking and reveal the natural beauty of it! Use a sample of your wood or make a test on a small part, in a corner for example, this is the best way to make a choice when it comes to order a larger quantity and start your project for good!
High-quality wood oil for exterior use by LIVOS is formulated for decks, patios, siding, wall cladding, and torrefied wood. ALIS by LIVOS is a three-in-one product: a sealer, protective oil, and stain for exterior wood surfaces. It provides maximum, long-lasting protection against weathering while preserving the natural look of the wood. Easy to maintain and re-touch. No need to sand the surface before refreshing the surface with a new coat of oil.
- No peeling
- Simple application with a roller, brush, or spray gun
- Exceptional coverage capacity: From 50 to 100 sq. ft. per litre for two coats
- Additional coats require much less product
- Highly effective and ecological oil in the same price range as a conventional toxic product
- SURFACE PREP
- The wood surface must be fully dry, dust-free, and absorbent. We recommend removing mill glaze with 100-grit sandpaper prior to product application. Apply the wood oil when the temperature is above 10 °C. Ensure that the temperature remains above 10 °C throughout the process and for 8 hours following product application. Wood humidity level must remain between 12% and 18% for optimal adhesion.
- WOOD OIL APPLICATION
- FIRST COAT
- Stir the product with a stirring stick to evenly mix the pigment and oil. Test the product on a small area to validate the colour before treating the entire surface. Apply with a brush, a spray gun, or a roller to fully saturate the wood. If needed, wipe down or smooth any excess wood oil after 5 minutes. Wait approximately 18 hours before applying a second coat.
- SECOND COAT
- Apply a thin coat of wood oil with a brush, wiping down or smoothing over any excess oil after approximately 5 to 10 minutes. On house siding, windows, or any other surface, a third coat is recommended. Proceed with the same application steps as during the second coat.
Ordering Alis exterior line samples will allow you to test the colours you are interested in for your project. Not only you will be able to compare your preferred colours but you will experience how natural wood oil can enhance your wood looking and reveal the natural beauty of it! Use a sample of your wood or make a test on a small part, in a corner for example, this is the best way to make a choice when it comes to order a larger quantity and start your project for good!
High-quality wood oil for exterior use by LIVOS is formulated for decks, patios, siding, wall cladding, and torrefied wood. ALIS by LIVOS is a three-in-one product: a sealer, protective oil, and stain for exterior wood surfaces. It provides maximum, long-lasting protection against weathering while preserving the natural look of the wood. Easy to maintain and re-touch. No need to sand the surface before refreshing the surface with a new coat of oil.
- No peeling
- Simple application with a roller, brush, or spray gun
- Exceptional coverage capacity: From 50 to 100 sq. ft. per litre for two coats
- Additional coats require much less product
- Highly effective and ecological oil in the same price range as a conventional toxic product